1 / 1
Toothed Idlers for SimpleCore Redux
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Revised rear idlers that allow for the use of toothed idlers in lieu of the smooth bearings from the BOM.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 31
- Makes
- 1
- Views
- 257
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These revised rear idlers that allow for the use of toothed idlers in lieu of the smooth 695 bearings from the BOM.
NOTE THAT THE BOM TOOTHED IDLERS FROM THE XY JOINTS WILL NOT WORK. The thick flange does not allow room for a washer between the bearings. You will need to use 20t idlers with 9mm overall height like those from Powge or Winnsinn.
The bearing stack is 1mm washer -> idler -> 1mm washer -> idler -> 1mm washer.
I have no idea if this actually improves VFA or anything. Theoretically it does.