Vidroc 808 BT-50 & 60 Nose Cone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Vidroc 808 BT-50 and BT-60 Nose Cone
This design makes it fairly simple to add an 808 Camera to your BT-50 or BT-60 based rocket.
The BT-50 version It takes advantage of the narrow body of the 808 and records the flight 'sideways'. The single hole version is for cameras that can record on power-up. The long hole version is for cameras that require two different buttons to be pushed to start recording. I've tested this with a number of different 808 cameras and the fit is good, but I primarily designed it for the MateCam 808.
Features
2mm hole in the tip for hanging the camera looking down during recovery.
Slot in the nose cone shoulder so you can run the nose tip shroud line into the airframe When I print it, I put supports across the upper openings but you may be able to print it without doing that.
For the BT-60 you need to add supports for the camera mount base and will need a RC servo mounting screw to retain the camera in the mount.
Category: Hobby