EU / PL Electrical conduit fitting for junction box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU based IP54 fitting for connecting a conduit to e.g. a junction box
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Built to replace hard to get conduit junction box connectors. In PL these are only found in specialist shops and these also can be a bit expensive.
This design uses nylon ziptie as a compression, to provide very tight fitting.
For now I rendered only version for conduits 25/19 and 16/11 (25mm outer 19mm inner etc.
Once/if I get more conduits to test I'll render more versions.
Adapter should be printed in TPU and nut should be made from either PETG or ABS.
Using specialized filament with Fire retardants is recommended to improve safety compliance of the adapter / fitting