1 / 8
Qidi Q1 Pro simple door holder for low temp printing - PLA, TPU, PETG — zdjęcie 1
1 / 8

Qidi Q1 Pro simple door holder for low temp printing - PLA, TPU, PETG

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple door holder with magnets dedicated for Qidi Q1 Pro printer for low temp prints

Ocena
5 / 5
Polubienia
36
Pobrania
227
Wydruki
3
Wyświetlenia
1261
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I didn't like the fact that the door felt a bit flimsy when opened, so I made this simple part.

 

It requires 2 x small magnets. 

I used 5x3mm magnets, but you can change parameters of those in project files. 
Step and Fusion files provided. Just change parameters in “modify” section. 

 

I printed my with ASA, but is it not required. PLA should be sufficient. 
0.16mm layer height maybe beneficial, so magnets holes would be more round. 
I didn't have to glue those magnets, but you may use a drop of superglue. 

If you want this part to be “double sided” - so both sides could be attached to door
and to the printer body as well - attach magnets to door magnets and then put them in the part. This way it will be attracted to both sides - regardless of orientation.  

Tagi