Qidi Q1 Pro simple door holder for low temp printing - PLA, TPU, PETG
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple door holder with magnets dedicated for Qidi Q1 Pro printer for low temp prints
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 228
- Makes
- 3
- Views
- 1,262
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I didn't like the fact that the door felt a bit flimsy when opened, so I made this simple part.
It requires 2 x small magnets.
I used 5x3mm magnets, but you can change parameters of those in project files.
Step and Fusion files provided. Just change parameters in “modify” section.
I printed my with ASA, but is it not required. PLA should be sufficient.
0.16mm layer height maybe beneficial, so magnets holes would be more round.
I didn't have to glue those magnets, but you may use a drop of superglue.
If you want this part to be “double sided” - so both sides could be attached to door
and to the printer body as well - attach magnets to door magnets and then put them in the part. This way it will be attracted to both sides - regardless of orientation.