1 / 5
Nudge - Removable 2.4 Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Removable Mount for Nudge, automatic nozzle alignment switch, for the Voron 2.4.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
About
This mod prove a repeatable mounting point for the stock Nudge near the back right corner of the 2.4 bed.
You can get the print files for Nudge at:
https://github.com/zruncho3d/nudge
Feature:
- Avoid reducing built volume in the Y-axis.
- Provide docking point for the Nudge, when not in usage.
- Feature a safety switch, that is triggered and prevent attempts to calibrate if the nudge is still docked.
BOM:
- 3mm X 20mm pin (2 off)
- 6mm X 3mm, Neodymium Magnet (3 off)
- 3mm Bore x 5mm OD x 5mm Length Plain Bearings (6 off)
- Micro switch (1 off)
- 2mm self-tapping screws (2 off)
- M3 x 20mm (2 off)
- M3 x 18mm (1 off)
- M3 x 5 x 4 threaded insert (1 off)
- M3 washer (1 off)
- M3 x 25mm counter sunk (2 off)
- Super glue - for the magnets (optional)
Print Parameters:
- ABS
- 40% infill
- No Support
- Orientated as given in STLs.
Notes:
- As the 3mm pins and sleeves are press-in-place, you might need a parallel clamp that can open at least 32mm wide. Alternatively, you can widen the holes with 3mm and 5mm drill bits.
- !!! BE MINDFUL OF THE MAGNET DIRECTION !!! - The part will need to be destroyed for magnet recovery.