1 / 5
Nudge - Removable 2.4 Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable Mount for Nudge, automatic nozzle alignment switch, for the Voron 2.4.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 27
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
About
This mod prove a repeatable mounting point for the stock Nudge near the back right corner of the 2.4 bed.
You can get the print files for Nudge at:
https://github.com/zruncho3d/nudge
Feature:
- Avoid reducing built volume in the Y-axis.
- Provide docking point for the Nudge, when not in usage.
- Feature a safety switch, that is triggered and prevent attempts to calibrate if the nudge is still docked.
BOM:
- 3mm X 20mm pin (2 off)
- 6mm X 3mm, Neodymium Magnet (3 off)
- 3mm Bore x 5mm OD x 5mm Length Plain Bearings (6 off)
- Micro switch (1 off)
- 2mm self-tapping screws (2 off)
- M3 x 20mm (2 off)
- M3 x 18mm (1 off)
- M3 x 5 x 4 threaded insert (1 off)
- M3 washer (1 off)
- M3 x 25mm counter sunk (2 off)
- Super glue - for the magnets (optional)
Print Parameters:
- ABS
- 40% infill
- No Support
- Orientated as given in STLs.
Notes:
- As the 3mm pins and sleeves are press-in-place, you might need a parallel clamp that can open at least 32mm wide. Alternatively, you can widen the holes with 3mm and 5mm drill bits.
- !!! BE MINDFUL OF THE MAGNET DIRECTION !!! - The part will need to be destroyed for magnet recovery.