1 / 4
Bambu P1S / P1P / X1 / X1C E3D Revo Panda Nozzle Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Revo nozzle holder for Bambulab machines.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 1017
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (37)Powiązane
A Revo nozzle holder for the Bambulab machines. The part holds a maximum of 8 Revo nozzles. It attaches to the unused Slot on the top right of the machine and acts as a holder and a plug at the same time. The part is flush with the side of the machine and therefore does not add more width to it.
I printed it on a Bambulab P1S with Spectrum GreenyHT filament, 0.2mm layerheight and 15% infill (Adaptive Cubic). You should be able to print this also in PLA or other standard filaments.