Watering Bottle Cap Revised
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the watering bottle cap from @3dprintnovesia, but unfortunately it leaked out of the thread, so i fxed it.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 119
- Wydruki
- 3
- Wyświetlenia
- 407
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I liked the watering bottle cap from @3dprintnovesia (https://www.printables.com/de/model/151956-watering-bottle-cap), but unfortunately it leaked out of the thread, so i fxed it. I just added a chamfered ring to seal the top of the bottle. It worked pretty well and have this thing now with me on every longer hike and camping tour.
I used the same print parameters as the original.
You can use “Duschkopf V3 Revised” as is. It could be possible that the ring is inserted too deep into the thread. If so, simply Import the “Ring Only” to the original STL and place it by hand. Fairly easy.