1 / 7
Portable Drive Buddy - A no-solder USB-C 9mm Disc Drive case — zdjęcie 1
1 / 7

Portable Drive Buddy - A no-solder USB-C 9mm Disc Drive case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Portable Drive Buddy is a sleek case for a 9mm disc drive, implementing a USB-C adapter, without any soldering.

Ocena
0 / 5
Polubienia
7
Pobrania
22
Wydruki
0
Wyświetlenia
223
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1.1 + General Attribution v1

Portable Drive Buddy v1.0

I wanted to create a (let's be honest) janky 9mm disc drive case that didn't require any soldering or custom parts and didn't have a cable sticking out of it. USB-C was the obvious way to go, so I used:

  • A typical SATA to USB cable

  • A USB-A to USB-C adapter

  • Ending with a USB-C female-to-female adapter

You can find all those parts on Amazon/Ebay/Aliexpress etc if you want to replicate this exact build, but you can also use differing parts. The only part that is fully implemented into the model is the USB-C female-to-female adapter, so make sure to use that as an end point.

Some glue may be required for the USB-C female-to-female adapter, and you can use thin double-sided tape for attaching the drive itself to the base. As for the cover, it can be press fitted, but feel free to apply some side glue if you think it's needed.


Hope you like it and find it useful!

I used my drive's front bezel cover (the black plastic part), but you can also print one of your own, there are a bunch of models for those around.

Printed on an Ender 3 V3 SE, with Sunlu PLA+ at 215C

Tagi