Fender Telecaster Replacement Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bridge to replace the too small one that came on a squire.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints flat on the build plate. I recommend 100% infill. I printed mine from PETG-CF but any rigid material should work. Be wary that PLA and PETG can distort, and you will lose tuning quickly. Glass or carbon reinforced materials should hold up well, mine has lasted a few months without any noticeable wear or need for adjustment.
It was originally printed because the bridge that came with a squire guitar could not fit the new pickup that i was installing.
You should reuse the saddles that came with the original bridge, however if there is demand I will model the entire assembly to print, and you just bring you own m3 bolts and nuts.