Fender Telecaster Replacement Bridge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bridge to replace the too small one that came on a squire.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 63
- Makes
- 0
- Views
- 582
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints flat on the build plate. I recommend 100% infill. I printed mine from PETG-CF but any rigid material should work. Be wary that PLA and PETG can distort, and you will lose tuning quickly. Glass or carbon reinforced materials should hold up well, mine has lasted a few months without any noticeable wear or need for adjustment.
It was originally printed because the bridge that came with a squire guitar could not fit the new pickup that i was installing.
You should reuse the saddles that came with the original bridge, however if there is demand I will model the entire assembly to print, and you just bring you own m3 bolts and nuts.