1 / 6
Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid — zdjęcie 1
1 / 6

Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,37 € – 1,68 € netto (bez VAT)

Dla pliku: 3x Adjustment Screw Print - Garmin R10 Approach Stand_0.2mm_PETG_MK3SMMU2S_1h49m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,52 € netto (środek widełek).

Masa podana przez autora
14 g
Czas druku podany przez autora
1,81 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This stand will help you easily align and level your Garmin Approach R10 Golf Launch Monitor to your shot line

Ocena
4,923 / 5
Polubienia
200
Pobrania
5634
Wydruki
26
Wyświetlenia
21 089
Oceny
26

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment stripe within the base.

Print center will fit a 32x7mm Bullseye Spirit Level, held in with a bit of superglue.

Alignment stick hole is modeled at 6.5mm to fit a ¼ inch wooden dowel. You may need to sand your dowel or add a bit of tape to get it to fit well depending on dowel tolerances. I painted my dowel red with spray paint. I also included the full STEP and F360 files in case you want to modify the print to fit your alignment stick or other needs better.

I printed my stand in SUNLU PETG. 

Listing this for sale somewhere?

That’s great! Please respect the license by including a link directly to this page, as sharing without attribution is not permitted. If you are making money from this venture, please consider leaving a tip as a thank you for the time and effort I’ve spent making and testing the model, and for making it freely available for commercial use.

Edit 9/22: Added longer adjustment screw files

Tagi