Logitech C615 Webcam 2020 V-Slot Mount With Printable Thumb Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For mounting a Logitech c615 webcam to 2020 v-slot with a printable thumbscrew.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 2
- Wyświetlenia
- 344
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Overview
This is a simple mount I designed to mount the Logitech C615 webcam to my Ender 5 printer. This contains two parts, a mount and a printable thumbscrew to fix the webcam to the mounting plate. I printed these both with PETG. The mount plate with about a 15% cubic infill and the screw with 100% infill.
The screw was generated since I didn't have one laying around and was too lazy to run to the hardware store. Overall, this works, but the screw didn't last after unmounting/remounting it about 4 or 5 times over the years, so your mileage may vary. I would recommend using a real screw if you can.
Bill of Materials (BOM)
In order to mount the plate to the v-slot extrusion, you will need the following hardware:
- 1 M3 x 8 screw (M3 x 10 also worked)
- 1 M3 Hammerhead T-nut