Beach towel anchor / pin / fixation

Function: It serves as a practical towel anchor, apply one on each corner of your (beach) towel or picnic blanket.

Benefits:

• Prevents your towel from flying away in windy conditions.
• Keeps your towel clean and sand-free.
• Adds a fun and decorative touch to your beach setup.

Design: 

• The 3D printed herring resembles a heart or an icecream cone
• The small gap on the sides is usefull if you want to tie them together with a rubber band.

Print settings:

• Choose material based on the temperature at your beach or swimming pool. PETG or ASA for higher temperatures
• You need to print 4 of these pins. 

How to use:

• Put the corner of the towel into the center hole;
• Pull the corner back trough the horizontal slot
• Push the pin into the sand
• Enjoy the beach! (definitely the most imporant step)
• Pull the pins out of the sand
• Optional: use a rubber band to secure the 4 or more pins.

(Please dont leave them on the beach, there is already enough plastic in the sea)