1 / 2
Beach towel anchor / pin / fixation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Practical towel anchor, prevents your towel from flying away in windy conditions
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Function: It serves as a practical towel anchor, apply one on each corner of your (beach) towel or picnic blanket.
Benefits:
- Prevents your towel from flying away in windy conditions.
- Keeps your towel clean and sand-free.
- Adds a fun and decorative touch to your beach setup.
Design:
- The 3D printed herring resembles a heart or an icecream cone
- The small gap on the sides is usefull if you want to tie them together with a rubber band.
Print settings:
- Choose material based on the temperature at your beach or swimming pool. PETG or ASA for higher temperatures
- You need to print 4 of these pins.
How to use:
- Put the corner of the towel into the center hole;
- Pull the corner back trough the horizontal slot
- Push the pin into the sand
- Enjoy the beach! (definitely the most imporant step)
- Pull the pins out of the sand
- Optional: use a rubber band to secure the 4 or more pins.
(Please dont leave them on the beach, there is already enough plastic in the sea)