Bracket for desk stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket was designed for an elevated desk stand (e.g. for a monitor). The geometry is based on a simple fractal ...
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket was designed for an elevated desk stand (e.g. for a monitor). The geometry is based on a simple fractal net (Y-branching), which is then further deformed by dynamic relaxation (via Grasshopper/Kangaroo) to give it an optimized organic look. It can be attached to a board with 4x30 screws. Height of the bracket is 95 mm.
Geometry was created using Rhino/Grasshopper.
Rendered in Blender/Cycles.
Print Settings
Printer: generic
Rafts: No
Supports: No
Resolution: 0.2 mm or 0.3 mm
Infill: 25%
Filament: generic PLA or PETG
Notes:
Infill percentage or material can be altered due to structural needs.