DJI FPV mount for Traxxas Stampeed 4x4 Old chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your Stampeed 4x4 or 4x4 VXL To FPV
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Convert your Traxxas Stampeed 4x4 or 4x4 VXL into an DJI FPV rig. This mount was designed to take a Caddx Vista (or Runcam version) and mount it inside the chassis of the Stampeed for FPV driving. Your body and body mounting will change the height of the camera mount needed but this design is specifically for this body and mount system (minor cutting to the stock body will get it to work).
Parts you need to buy for this exact build:
- Caddx Vista with OG Air Unit Camera (Runcam will work and other cameras will work with some adapting)
- Pro-Line Racing Extended Front & Rear Body Mounts Stampede 4x4 PRO626500
- Pro-line Racing Coyote Grande Clear Body for 12.3" 313mm Wheelbase Scale Crawlers PRO362500, (others bodies may work, test as you see fit)
- Longer screws for the front and back body mounts into the shock towers.
- Fan 30mmx30mmx10mm Brushless Cooler DC 5V Compatible
- This one worked but is not that strong, https://www.amazon.com/gp/product/B08F9VZ2X3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=
- Wires to tap into a 5v port on your truck to power the fan
- Male balance plug and wires to use the Lipo Batteries power to run the Vista
- Drill to widen the screw hold on the printed Chassis mount if it does not line up perfectly with the shock towers, mine did but I tested on a different truck same model and it needed some drilling.
- A few Zip Ties
This is a model in testing and I am open to tweaks and suggestions. I am currently working on a v2 that will support a 1s FC to add battery power levels, possibly GPS to the mount, and an antenna mount for the back (currently ziptied and working great).