74mm Model Rocket Coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a74mm model rocket body tube adapter.
It connects 2 (74mm) x cardboard body tubes.
It is designed to be used with body tubes like this ones:
Apogee - 74mm x 18" Body Tube (Thin Wall 3" tube)
It is meant to substitute 3" Tube couplers, such as:
Apogee - Tube Coupler for 3" diameter Thin-Wall Model Rocket Body Tubes
The printed part, weights less than the cardboard couplers by a few grams.
You will need 4 screws (2.5/3mm) to hold the coupler to the tube in place.
CAD Fusion360 model included in files
Print instructions
Category: Vehicles Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 10
Filament: ANY PLA - PETG
Notes:
Print this with the rounded part facing down.
Does not need support at all.