74mm Model Rocket Tube Avionics Bay for BPS Blip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a74mm Model Rocket.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1094
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a74mm Model Rocket.
It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place.
It is designed to be used with body tubes like this ones:
Apogee - 74mm x 18" Body Tube (Thin Wall 3" tube)
It is meant to substitute 3" Tube couplers, such as:
Apogee - Tube Coupler for 3" diameter Thin-Wall Model Rocket Body Tubes
You will need 4 screws (2.5/3mm) to hold the coupler to the tube in place, plus 3mm screws to hold the PCB in place.
You may find more info about the avionics/flight computer Blip on YouTube here or at BPS website. Blip is an open source flight computer, however it is a starting point for your own projects. The PCB files are available for patreons of BPS (Not related to me).
Print instructions
Category: Vehicles Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .20
Infill: 15%
Filament: Any PLA or PETG
Version History
- Added Step (stp) file.