74mm Model Rocket Tube Avionics Bay for BPS Blip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a74mm Model Rocket.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 49
- Makes
- 0
- Views
- 1,094
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is an avionics bay for BPS Blip Flight Computer + Fuselage Tube connector for a74mm Model Rocket.
It connects 2 (74mm) x cardboard body tubes and holds the battery and the BLIP PCB Board in place.
It is designed to be used with body tubes like this ones:
Apogee - 74mm x 18" Body Tube (Thin Wall 3" tube)
It is meant to substitute 3" Tube couplers, such as:
Apogee - Tube Coupler for 3" diameter Thin-Wall Model Rocket Body Tubes
You will need 4 screws (2.5/3mm) to hold the coupler to the tube in place, plus 3mm screws to hold the PCB in place.
You may find more info about the avionics/flight computer Blip on YouTube here or at BPS website. Blip is an open source flight computer, however it is a starting point for your own projects. The PCB files are available for patreons of BPS (Not related to me).
Print instructions
Category: Vehicles Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .20
Infill: 15%
Filament: Any PLA or PETG
Version History
- Added Step (stp) file.