Shift knob for Toyota (M12.1.25)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable shift knob for most older Toyotas and other cars with a M12.1.25 thread.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The first shift knob I designed for use in my Toyota MR2 roadster. This should be compatible with most older Toyotas and cars without a reverse lift mechanism on the shifter. Only exception I know of should be the GT86 / BRZ.
This could even work on other models so long as they use a M12x1.25 thread.
This design was used as a tester for a carbon fibre variant now being used in a Race spec track car.
I have printed this with 100% infill with at least 4 perimeters in PETG. I had to chase the thread with a M12x1.25 tap to clean it up. For lighter weight use 50% infill.