Shift knob for Toyota (M12.1.25)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable shift knob for most older Toyotas and other cars with a M12.1.25 thread.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 107
- Makes
- 1
- Views
- 496
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The first shift knob I designed for use in my Toyota MR2 roadster. This should be compatible with most older Toyotas and cars without a reverse lift mechanism on the shifter. Only exception I know of should be the GT86 / BRZ.
This could even work on other models so long as they use a M12x1.25 thread.
This design was used as a tester for a carbon fibre variant now being used in a Race spec track car.
I have printed this with 100% infill with at least 4 perimeters in PETG. I had to chase the thread with a M12x1.25 tap to clean it up. For lighter weight use 50% infill.