Filament guide sleeve for Dragonfly BMO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide sleeve/PTFE holder for Dragonfly BMO on Filametrix filament cutter.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a filament guide sleeve for the Dragonfly BMO for use with the Filametrix filament cutting tool-head. It is designed to keep the filament in place during the cutting move.
Required Items:
- 1x 3mm brass heat-set insert
- 1x length of PTFE tube
Print upright. Orient tapered section towards print bed so no supports are needed.
Use a large diameter drill to put a chamfer into top of brass insert.
Cut PTFE tube to length. It should be just long enough to fill the space in the cold end and have the insert sit flush with the top of the bowden adapter. It may take a few tries, cutting in small increments so as to not leave a gap.
I also filed and sanded the top of the insert for a smooth finish. You don't want any burrs as this will catch and break the cutter blade of the Filametrix.