1 / 4
Single slot Dual GPU Display Stand Pcie Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual GPU Display Stand
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 1098
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
Very low filament, double GPU version of the GPU display stand made by IVIarc_Antoine.
I already made a single gpu version but it was waaaayyy too unstable so I made a double gpu version for stability. >Here it is< if you really need it, but I dont advise it lol.
I needed it to re-organize my GPU drawer so i thought I'd share. It's a bit scuffed, but it does what it needs to.
Print time is around 40 minutes at 60 mm/s, only 7g of filament each.
