Parametric ESP-WROOM32 pick and place tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CadQuery parametric tray for use with a pick and place for ESP-WROOM32 modules
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a parametric tray for doing pick and place with ESP-WROOM32 modules. The design is done in CadQuery, and sorry that the code is super sloppy, but I thought it was better to just provide it. Note that as built this is nominally for use with a LumenPnP, but I stick down trays and feeders with 1.75mm thick 3M foam tape, so that is accounted for in the height. I included a 2x5 tray as an STL, but you can generate more with CadQuery. If you have need for other sizes and can't do CadQuery, drop a like and a message here and I'll see if I can get to generating your size.