1 / 5
Voigtlander 35mm F0.9 Nokton lens built in 49mm filter adapter ring — zdjęcie 1
1 / 5

Voigtlander 35mm F0.9 Nokton lens built in 49mm filter adapter ring

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple adapter ring to mount glass from B+W 49mm XS-Pro slim UV filter under the front nameplate of Voigtlander 35mm…

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
266
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simple adapter ring to mount glass from B+W 49mm XS-Pro slim UV filter under the front nameplate of Voigtlander 35mm F0.9 Nokton lens in Fuji X mount

Steps:

  1. Soften factory glue by dropping few drops of acetone into front filter thread
  2. Unscrew CCW front nameplate ring
  3. Extract glass from B+W 49mm XS-Pro slim UV filter (unscrew CCW retention ring on the rear filter side)
  4. Clean filter from dust, clean front lens glass from dust.
  5. Insert filter glass into 3D printed frame, then insert frame with glass on top of front lens module
  6. Screw in lens front nameplate in CW direction until it stops moving

Print Settings

Printer Brand:

ELEGOO

Printer:

ELEGOO NEPTUNE 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Filament: ELEGOO PLA PRO Black

Category: Camera

Tagi