KTM 990 LC8 Fidget Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified KTM LC8 as fidget toy. Gears prints in place.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 313
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 75° V2 Engine fidget toy inspired by a KTM 990 LC8 engine.
This is what I came up with. Crankshaft and pinion are connected with print in place gears.
Connect cylinder and rod with a piece of filament. Then insert as shown in the pictures.
At last screw in the cap.
I used a soldering iron to fix the piece of filament on the cylinder.
The thread on the cap was a tight fit for me, so I didn't need glue here.
After using silicone spray and a bit of moving the Engine makes a really good figdet toy.
Inspired by https://www.printables.com/model/878041-v-engine-keyring