KTM 990 LC8 Fidget Engine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simplified KTM LC8 as fidget toy. Gears prints in place.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 31
- Makes
- 1
- Views
- 313
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a 75° V2 Engine fidget toy inspired by a KTM 990 LC8 engine.
This is what I came up with. Crankshaft and pinion are connected with print in place gears.
Connect cylinder and rod with a piece of filament. Then insert as shown in the pictures.
At last screw in the cap.
I used a soldering iron to fix the piece of filament on the cylinder.
The thread on the cap was a tight fit for me, so I didn't need glue here.
After using silicone spray and a bit of moving the Engine makes a really good figdet toy.
Inspired by https://www.printables.com/model/878041-v-engine-keyring