29 models
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The front D-Ring mounts are also 3mm holes. Behind the stinger is a…
The stepfile is only the left side. Just mirror the side for the other. printed without support.
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The D-Ring mounts are also 3mm holes. There is a 6.2mm W x 6mm H hole for a…
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an HPI Venture there are also body mounts available here on my Printables Site. L and R mean left and right. Most parts…
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
Please read full description from original.
Der Schalter von unserem Siemens Dunstabzug ist gebrochen und gibt damit den Blick auf die hässlichen Microswitch frei. Nachdem ich keinen Schalter mehr (muss wohl ca. 14 Jahre alt sein) auftreiben konnte habe ich mit Fusion 360 ein…
Need 6mm OD aluminum tubing. Cut to taste and glue (cyano should do the trick). Should also work with the FCX10 K5 provided you print a mirrored one for the driver-side.
LC80 Body Mount for TRX-4M Bronco / Defender Compatible with: TRX-4M Bronco / Defender Tested with: Injora Universal LCG Frame (no K10 extenders) Disclosure no AI was used to make the model or design, but I used chat gpt to format my…
Mine developped a crack and was floppy. Here's a replacement with and with tow hitch mount. Used an existing bumper mount as a base but can't found it back, sorry. 15-08 : added reinforced mounts (v2)
Print in TPU. Glue to the rear lip of the rear inner fenders.
KTM 990 950 LC8 SAS block off plate. -Print out of PPA-CF or PPS-CF. -crimp close the OEM reed valve in the engine before installing.
This is a 75° V2 Engine fidget toy inspired by a KTM 990 LC8 engine. This is what I came up with. Crankshaft and pinion are connected with print in place gears. Connect cylinder and rod with a piece of filament. Then insert as shown in…
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
Instructions With this special mounting tool, the water pump shaft seals on the KTM LC8 engine from a 1190 RC8 can be installed professionally and safely. Below you’ll find a step-by-step guide for replacement and installation. Remove the…
Soporte en forma de L para Injora Winch de 35kg. Está colocado en un LC80 Pro V2 con tornillos de 3mm, tuercas y arandelas. El archivo está listo para imprimir en esa pocisión.
General Description: L and R mean left and right. Most parts are available for both sides; if not, they must be mirrored in the slicer. Unfortunately, I sold the Venture, so there won't be any more parts. Maybe the ones here can help…
Print 4x with the split side down and supports on. Attach to the frame rails, then install the frame rails and glue the 3d printed parts where they meet.
I replaced the halogen lamps with LED lamps. Since the LEDs require more space than the halogen lamps, and the original cover glass no longer fit (and was also broken), I designed an alternative cover. Note: Due to their low power…
So you can tow your big trailers with your sick rigs!
Replacement magnet cap for the Siemens LC85KDK60 extractor hood. This model replaces the small original cap that holds the magnet. The dimensions were refined through test prints and verified on the actual extractor hood. A central…
Hello everybody, I was working on my KTM LC8 clutch and i needed a tool. Designed it from one of the clutch plates and the outer clutch hub. I think it needs to be printed in strong material, because the forces are great to losen the…
I replaced the halogen lamps with LED lamps. Since the LEDs require more space than the halogen lamps, and the original cover glass no longer fit (and was also broken), I designed an alternative cover. Note: Due to their low power…
FMS FCX18 Toyota Land Cruiser 80 Inner fenders with side steps + display stand This model is designed for the FMS FCX18 Toyota Land Cruiser 80 version with removable fenders . The set includes: Inner fenders with integrated side steps /…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
