Robot Car with attachable turret! (Arduino Compatible!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cool robotic car to keep you busy if you have been longing for a fun tinkering project! (Arduino or ESP32)
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 1328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Robot Car Platform - 2024
I started this project back in 2022 after longing for a new project to set my eyes to! This robotics platform is compatible with Arduino boards as well as the popular ESP 32 chip which enables Wi-Fi capability. Assembly is simple and just requires a bit of glue, hot glue works perfect and bonds well.
The prints are easy to do without major supports. I printed it on my good old Ender 3 Pro.
Features and customizability:
- Remote control function when using a Wi-Fi compatible board like ESP32
- You may use your own tyres or even rugged 3d printable tracks (much like the Snow-Cat from RCTestFlight)
- Easy printable parts
- Optional LED spotlight to deter anyone!
- Optional remote monitoring via Camera
- Houses tons of sensors to help with Automation/Waypoints.
- 12v fan cooling components
- Easy power-up process via one button
- Has a 360 turret you can mount on top that houses the sensors! (See pictures included!)
Here is a parts list for what I used: (All widely available at electronics stores)
- 9 x 5mm LED

- PIR sensor module
- Ultrasonic sensor module
- Flame sensor module
- Raspberry Pi Camera Module *Optional
- Raspberry Pi *Optional
- L298N Motor driver
- 12v DC Motors
- LED Spotlight panel *Optional
- 12v AA battery holder
- 8 x AA batteries
- Jumper cables
- 180 degree Servo motor 9g (This turns the turret)
It is printed in a few parts that can be joined together with nuts and bolts or even glue.
NOTE that holes on side are meant for:
- Back ones are for the motor-shafts
- Front ones are for ball bearings where you can attach all kinds of wheels or tracks!
Happy printing!