Stabalizers (Deck Panel TheFilter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TheFilter side filters stabalizers to prevent the side filters falling when flipping the printer to work on it.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of the side filters from The_Filter by Nateb16 (https://github.com/nateb16/VoronUsers/tree/master/printer_mods/nateb16/THE_FILTER) falling either into the printer or onto the floor everytime I flipped the printer. I was already using the deck panel supports clips by wile-e1 (https://mods.vorondesign.com/details/aBGbXOxS452m5bKCS7hWlw, https://github.com/VoronDesign/VoronUsers/tree/main/printer_mods/wile-e1/Deck_Panel_Support_Clips). So I designed a simple stabalizer out of them to prevent the side filters falling. This is my first time modifying anything or using CAD.
Print with the tab on the plate. 0.4mm nozzle, abs recommended, standard print settings
I hope you find these useful!