Interlocking Garage Floor Tiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled for an RC car off of the full size tiles, this can be resized to whatever fits your scene. Usable at any size!
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The prints here are at 33% scale of my original STL. Final prints are ~ 71mm square by 2mm high. I printed in fast draft mode at 0.28 layer height.
Just like the real thing these may need a solid tap with a blunt edge to snap the edges into place. Worked great on my prints with PLA+!
I did find that the PLA+ tiles did have a little warp after I had a 4x4 section built up. I preheated a print bed to 70°C to warm up the grid and then put a heavy box on it while it cooled. Worked out well.