RatRig V-Core 3.1 Umbilical TPU Gasket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps seal and support the umbilical in enclosed RatRig V-Core 3.1 machines.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a gasket to help better seal your V-Core 3.1 with enclosure 2.0. The size of the round opening will depend on your exact umbilical size and how many cables you have. This is sized for a USB cable for a toolboard, a second USB cable for beacon, 2x 18 gauge power wires, and 4x 22 gauge wires for the 4028 fan. I included the step file so you can make the hole bigger if needed for bigger umbilicals.
It is a tight fit to get this in place and needs to be bent/smooshed a little to slot into the proper location (at which point it should fit appropriately). Print in flexible TPU with 2 walls, 2 top/bottom layers, and a spare infill (cubic at like 10-15% worked well for me). Hope this helps seal up your enclosure better!