RatRig V-Core 3.1 Umbilical TPU Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps seal and support the umbilical in enclosed RatRig V-Core 3.1 machines.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 29
- Makes
- 1
- Views
- 533
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a gasket to help better seal your V-Core 3.1 with enclosure 2.0. The size of the round opening will depend on your exact umbilical size and how many cables you have. This is sized for a USB cable for a toolboard, a second USB cable for beacon, 2x 18 gauge power wires, and 4x 22 gauge wires for the 4028 fan. I included the step file so you can make the hole bigger if needed for bigger umbilicals.
It is a tight fit to get this in place and needs to be bent/smooshed a little to slot into the proper location (at which point it should fit appropriately). Print in flexible TPU with 2 walls, 2 top/bottom layers, and a spare infill (cubic at like 10-15% worked well for me). Hope this helps seal up your enclosure better!