1 / 1
Octopus Mount on Pixa Rails (Max EZ or Standard) — zdjęcie 1

Octopus Mount on Pixa Rails (Max EZ or Standard)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easily expandable by adding more wire organizers or more board mounts like the Raspberry Pi around this mounting system.

Ocena
0 / 5
Polubienia
11
Pobrania
50
Wydruki
0
Wyświetlenia
605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This mount has a rail system inspired by the Pikatinny rail system on guns (except the profile is rotated for easy printing). You can attach other other devices, no screws required, around this mount by printing other rail adapters or design your own.

You probably also want to print the Raspberry Pi Pixa Mount. Use the Pixa Standoff model to connect the two board mounts together. You should screw the Octopus mount to your printer but the RPi mount doesn't have to be screwed to the printer if you use the PixaStandoff model to secure it.

Tagi