1 / 1
28,6mm Handlebar GPS mount with AMPS pattern (Large version)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to mount GPS such as Garmin / Tomtom on any 28,6mm motorcycle handlebar
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this adapter to mount a GPS or phone holder that use the AMPS holes pattern on a 28,6mm handlebar, and 4 screw and 3×5mm rilsan bracelets.
This diameter is the same on some naked bike such as MT-09 and is very common on off-road bikes.
This model is supposed to be printed with 2 materials :
- The AMPS plate with hard materials such as PETG, ABS ASA
- The two bracket that hold the handlebar need to be printed in flex materials, such as TPU, to get a strong adherance so the whole system will not rotate.
This is a larger version of the previous one posted previously.