LED Flashlight for the XRP robotic kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't let your XRP robot get lost in the dark! This is a rotatable mount for a 5mm LED.
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — NoDerivatives
Don't let your XRP robot get lost in the dark! This model is compatible with the 5mm LEDs. It's designed to be attached to the hole(s) on the XRP base. It does not need any supports, so the printing is pretty easy. Can be printed in one or multiple colors. I recommend you print two flashlights - each one on each end.
Print recommendations:
It doesn't need supports, just orient it right. I printed it with the basic Bambu slicer settings so I think there's no need to change them. I don't have a Prusa printer so I didn't test the sliced file in Prusa slicer, but I don't think there could be troubles.
What do you need:
- Printed parts
- LED(s)
- 220 Ω resistor(s)
- 2x wires
Assemble tutorial:
First, here is a photo of all the components needed:
- Take the LED and resistor and cut its ends:
- Solder a resistor and wires to the LED as shown:
- Put it to the LED mount:
- Snap the XRP mount to the hole:
- Attach the upper cover:
- Have fun!
I don't actually have the XRP robotics kit, so I created a simple replica for the photo :)
