1 / 2
Hi-Lift Jack Offroad Wagenheber 1/18 scale
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi-Jack Lift in a small scale 1:18 for RC-Cars like the TRX-4M
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 307
- Wydruki
- 0
- Wyświetlenia
- 1915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (87)Powiązane
Here comes a little Hi-Jack Lift in a small scale 1:18.
I printed it in PLA, but other filaments should also work.
For assembly you need a few M2x8 screws
Have fun!