1 / 2
MiataDash
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My miata headunit project
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a project I worked on in 2021 that I've always wanted to release but was too lazy to do so.
This kind of bracket (headunit.step) is meant to be used on any Mazda MX5/Miata NB from 1998-2005 (I'm not sure if it might be compatible with other models).
It was designed to fit this specific display/touchscreen, as we can mount a Raspberry Pi on its back.
I had it printed in ABS, and it has been holding up quite well for the past three summers.
I hope it will be useful to someone.
This was also published on GitHub in 2022.