John Deere X300 Hood Adapter – Replace with Craftsman Hood | 3D Printed Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed adapter lets you mount a Craftsman hood on a John Deere X300—durable fix for brittle hoods.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Tired of cracked John Deere hoods?
John Deere X300 hoods are notorious for becoming brittle and breaking when left outside. Instead of replacing it with another expensive plastic hood, this 3D-printed adapter lets you attach a durable Craftsman hood (mostly metal) to your John Deere X300 using the factory hinges. It’s a long-lasting, budget-friendly solution that keeps your mower running and looking good.
🔧 Installation
Includes left and right side adapter prints.
Reuse the original John Deere hardware to mount the adapters.
Craftsman hood will need a ¼-20 bolt hole drilled on each side.
🖨 Print Settings / Advice
5 walls, 5 top layers, 5 bottom layers for strength
Recommended material: PETG (better UV/weather resistance)
Infill: 30% (or more for extra durability)
⚙ Hardware Required (all ¼-20)
(4) 1" hex head bolts
(4) 1" washers
(4) lock washers
(4) hex nuts
YouTube
Print Settings
Printer Brand:
QIDI
Printer:
Max 3
**Rafts:**
No
Supports:
No
**Resolution:**
.2
Infill:
30%
**Filament:** Creality Petg Black
Category: DIY