Sovol SV08 Z belt HELPER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this mod you can mount your Z belt and you can proper tighten them without needing extra 2 hands :D
- Ocena
- 0 / 5
- Polubienia
- 91
- Pobrania
- 311
- Wydruki
- 1
- Wyświetlenia
- 2505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod that help you clamp the 2 end of the Z belt to be equal and also to do them alone.
To mount the Helper is easy you need to mount the top and bottom first and after you have secured them to the belts and behind the frame. you can put the long M3x30 bolts to grab the 3 parts together. longer heat set insert on the pillars
Enjoy and Happy printing!
Use PLA or PETG
Print settings
Layer height 0.2
Top/Bottom/walls 5/5/4
Infill 30%
BOM
Screws
4x M3x30 mm
2x M3x8mm
Heat set inserts
2x M3 heat set inserts 4mm
2x M3 heat set insert 5,7-6mm 4.5 OD