Sovol SV08 SSR/PSU 120mm Fan cover With Speed Adjustment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Sovol SV08 SSR/PSU cover with Dual 6015 fans from bombsquad85 for 120mm Fan
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 168
- Wydruki
- 4
- Wyświetlenia
- 1139
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I like the idea from bombsquad85 but i want to use a 120mm Fan. So i created a remix for a single 120mm fan ;-)
I print it in PETG but better materials like ASA/ABS will maybe work better.
For Speed Adjustment based on the temperature of the Mainboard do following Steps:
Go via mainsail to your Printer.cfg
comment out with # the following 3 lines:
[fan_generic fan3] # exhaust fan
pin: PA2
max_power: 1.0
Paste this in:
[temperature_fan fan4]
pin: PA2
kick_start_time: 0.5
max_power: 1.0
min_temp: 0
max_temp: 90
hardware_pwm: true
target_temp: 60
sensor_type: temperature_host
max_speed: 1.0
min_speed: 0.1
control: pid
pid_Kp: 2.0 ;40
pid_Ki: 5.0 ;0.2
pid_Kd: 0.5 ;0.1
pid_deriv_time: 2.0
save and restart klipper.