Carabiner Loop for Butane Canister UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for TPU printing, to slide tightly around a butane canister with a handy loop for clipping to your pack.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 73
- Wydruki
- 2
- Wyświetlenia
- 1426
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated 14 August 2024: Added a wider version of the small loop, and a new larger loop.
The original was made for the smaller size of butane type fuel canisters used by Jetboil, MSR, et al. Advertised can capacities are ~100g and ~230g depending on the fuel blend and brand. The loops are sized to 86mm ID and 105mm ID respectively. This gives a snug fit without being difficult to put on the cans I have on hand right now (Gas One, JetBoil, and GSI brands).
Given that a can with fuel in it should have some weight still, and the loop is meant to fit right against the bottom lip … it should hang down and away from the loop. If you want a tighter fit I would downsize very slightly or let me know if you have a specific dimensioning request!