Carabiner Loop for Butane Canister UPDATED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for TPU printing, to slide tightly around a butane canister with a handy loop for clipping to your pack.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 73
- Makes
- 2
- Views
- 1,426
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated 14 August 2024: Added a wider version of the small loop, and a new larger loop.
The original was made for the smaller size of butane type fuel canisters used by Jetboil, MSR, et al. Advertised can capacities are ~100g and ~230g depending on the fuel blend and brand. The loops are sized to 86mm ID and 105mm ID respectively. This gives a snug fit without being difficult to put on the cans I have on hand right now (Gas One, JetBoil, and GSI brands).
Given that a can with fuel in it should have some weight still, and the loop is meant to fit right against the bottom lip … it should hang down and away from the loop. If you want a tighter fit I would downsize very slightly or let me know if you have a specific dimensioning request!