Traxxas Maxx V2 Cable Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Traxxas Maxx V2 cable Guide to hold extra wires
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this wire channel to help keep the wire better contained inside the chassis. I have the light kit and I made a dual fan mount for the motor and had wire all over the place. I kept snagging the wire every time I put in or take out the battery plus I didn't like how the wires looked like a mess.
Top holes allows you use zip ties to hold the wires in place. While the bottom triangles allows water to drain down away from the wires.
Hardware required: 2 M3 cap screw/button head with about 11mm of thread.
Note: this wire channel will not work with the V1 Maxx as the V2 Maxx has a longer chassis.
Print Setting I used:
.2mm layer
2 wall
15% infill with gyroid
4 top layers and 3 bottom layers
printed out of PETG