Traxxas Maxx V2 Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Traxxas Maxx V2 cable Guide to hold extra wires
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this wire channel to help keep the wire better contained inside the chassis. I have the light kit and I made a dual fan mount for the motor and had wire all over the place. I kept snagging the wire every time I put in or take out the battery plus I didn't like how the wires looked like a mess.
Top holes allows you use zip ties to hold the wires in place. While the bottom triangles allows water to drain down away from the wires.
Hardware required: 2 M3 cap screw/button head with about 11mm of thread.
Note: this wire channel will not work with the V1 Maxx as the V2 Maxx has a longer chassis.
Print Setting I used:
.2mm layer
2 wall
15% infill with gyroid
4 top layers and 3 bottom layers
printed out of PETG