Seeed studio reRouter RPi CM4 10-inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10-inch Rack Mount for the Seeed Studio reRouter carrier board for the Raspberry Pi Compute Module 4 (CM4)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 1024
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 10-inch Rack Mount for the Seeed Studio reRouter carrier board for the Raspberry Pi Compute Module 4 (CM4). You can optionally mount up to two SSDs to it.
This particular board can get pretty hot, so I added a heatsink and some holes close to where the CM4 should be. If you have a cooler, it may be a good idea to add it too.
To mount the board, you need to screw it from below, after you put the CM4 into it.
Materials
- 4x M2.5 screws 8mm (For securing the CM4 in place).
- 4x screws and nuts for the cooler, but the size depends on your fan dimensions.
- The reRouter CM4.
- A CM4. Take a look at https://rpilocator.com/ to find one.
- Some passive or active cooling for the CM4, like the one from Waveshare.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Printer Brand:
Anycubic
Printer:
Custom Mega X
Rafts:
Doesn't Matter.
Supports:
Maybe, depending on your bridging.
Resolution:
0.2 or 0.24
Infill:
20%
Filament:
PLA+/PETG/ABS/ASA/Nylon - Any should be good.
Notes:
I have added two STLs, one in which you can mount two 2.5-inch SATA SSDs with the reRouter, and another model just for the reRouter.