Paddle Extensions for Moza Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
14mm Stand-off for a Moza FSR Wheel (May also work on CS and ES wheels)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 2264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
The following model is to allow you to have your paddle shifter closer to the wheel rim on a Moza FSR wheel. If you have smaller hands like I do you will probably find this much more comfortable. The stand-off puts the paddle shifters significantly closer to the rim by 17 mm (14mm from Stand-off, 3mm from flipping position).
In order to use this you will need to print 4 stand-offs (presuming you want to change clutch and shift), and you will also need 8 M3x20 button head screws to replace the ones that came with the wheel. You should be able to get these in a M3 screw pack off amazon or if you are building up your hardware collection you can get 100 qty. for about $5 on McMaster (LINK)
Looking at photos it looks like this will work for ES and CS wheels, but not the KS.