1 / 5
xTool smoke purifier exhaust port converter (10cm, 4in) — zdjęcie 1
1 / 5

xTool smoke purifier exhaust port converter (10cm, 4in)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows you to connect a standard dryer hose to the exhaust of the Smoke Purifier to vent the remaining fumes.

Ocena
0 / 5
Polubienia
5
Pobrania
58
Wydruki
0
Wyświetlenia
315
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have the xTool Smoke Purifier as I live in a flat and don't want to vent fumes straight out of the window. The purifier does a good job on the fumes but I wanted to be sure nothing was coming into the room.

The hose that comes with the purifier isn't very long, so I bought a hose for a tumble dryer and made this adapter that fits over the existing outlet.

I printed mine with eSUN PLA+ on the Bambu P1P.

Nozzle: 0.4mm, 0.2 ‘strength mode’.

I used a brim, as it's a fairly long print but it may not need it.

Tagi